Thursday, September 27, 2012

Second RepRap Fire (Again, not RepRap's fault) :)


I set my Mendelmax on fire today... 

Hint to the wise, do not be printing on one, printer, forget the power switch is live on the Mendelmax... cut wires to fan so you can add two more to keep your POS Printroboard from overheating and immediately have the wire you cut erupt in flames.

Next step is to not run out of the room looking for a fire extinguisher that you wife moved while cleaning the kitchen... that would be the time you would want to ... I don't know turn the power off to the PS?

So while Mendelmax is on fire, I am in the other room looking for a fire extinguisher (power supply still on), the fire alarm goes off.  Wife sticks head out of door asking what the hell is going on (Third Shifter).. I say popcorn again.. she goes back to bed.

Get back in office, no fire extinguisher, turn power off.  Patt out the burnt wires.  After 1 hour of trouble shooting I lost 2 RP parts, pretty much all my wires, and that's about it.... WIN! (ish)


This is the Second RepRap I have ever set on fire :)

12 comments:

  1. What? I don't even...

    So this fire was from human intervention... should I get a fire suppression set up for any in attended printing?

    What was your first fire?

    ReplyDelete
    Replies
    1. 1st one was a RepRap made out of wax experiment I did a few years back... who would have thought RP parts made out of wax would melt when the steppers got warm?

      This was because I cut a hot wire, and then turned instantly into a moron. Nothing wrong with the RepRap :)

      Delete
  2. Neil,

    Sounds like you need one of these wired directly into the circuit you use for your repraps!

    http://upload.wikimedia.org/wikipedia/commons/thumb/f/f9/Not-Aus_Bet%C3%A4tiger.jpg/220px-Not-Aus_Bet%C3%A4tiger.jpg

    Drew

    ReplyDelete
    Replies
    1. Yea, the printroboard has provision for that.. but considering I am using a switching ps it would not have helped :)

      Delete
    2. No, I meant wire that a 120V switch like the one pictured *DIRECTLY* into your home circuit that you use for the repraps, that would have definitely worked!

      Drew

      Delete
    3. Yea, I am a moron :) But I have a switch where that button would be... Monkey brain took over and was looking for a club to kill the fire demon.

      Delete
  3. Pretty nice post. I just came across your blog and wanted to say that I’ve really liked reading your posts.

    ReplyDelete
  4. OK We just wanted to do this quick introduction post. Our name is DFW Makers Club, located in Dallas-Fort Worth metroplex area in the state of Texas. We are to our knowledge the latest hackerspace to open up in the Dallas-Fort Worth metroplex. We are for the most part a group of students who have started this project and are going through the steps to eventually open our doors to the public at large reasonably early next year. We are trying to meet up to our challenges and overcome them in the process to build a model organization. Our central goal is for our hackerspace to act as a community oriented nonprofit workshop helping people of all walks of life pursue technology and industrial related interests both as a group and as individuals. We shall do that by:

    1. Educating, teaching and instructing youths, school children, the unemployed who wants to gain new employable skills etc etc and we shall spread our knowledge, knowhow and expertise in the fields in which we as a group or as individuals may excel.

    2. By giving the community at large access to tools, expertise, knowhow and manpower in order to work on their own projects and also contribute to the hackerspace in their own right.

    3. By recruiting among our local communities and by having regular get together in order to build solidarity with and among our hackerspace, our immediate community and the overall community of Dallas-Fort Worth metroplex. We also aim to reach out, network and build friendships with other hackerspaces.

    The challenges faced by our organization are many but the most debilitating one is that of a general lack of resources esp. at the rate that we are expanding our overall activity. Given the fact that most of the members of our hackerspace are students and as enthusiastic as we are we come from mostly humble backgrounds. Therefore in order to meet our economic and resource related challenges - namely a dedicated workspace open to all 24/7, we are considering raising capital and are interested in starting a kickstarter campaign. What do you guys think? We are interested in hearing from established hackerspaces such as yourself. Let us know if you have any questions, we will be glad to reply and update you with the pertinent information. And of course we would definitely appreciate any word of advice and any support in substance and/or in spirit.

    You can follow us on our website hackerspace and facebook.com/DFWMakersClub.

    Thank You.

    ReplyDelete
  5. Nice,
    Thanks for your grateful informations,

    I am working in, asian affairs magazine. Try to post best informations like this always

    India: Protests must culminate in political action

    ReplyDelete
  6. Where have you been? I really miss the Around the Community! Are you still into 3d printing or have you moved on?

    ReplyDelete
  7. PS4 system meeting lately. Blizzard delivers almost all lovers a big shock, the PC edition of Diablo 3 will be arrived in PS4 with PS3 system, and support for off-line play.

    Buy WOW Gold  RS Gold  Buy Diablo 3 Gold

    ReplyDelete
  8. It may be every wish and every Runescape player to win the gold medal. For gold, may belong to the primary goal of the game.You should try to tap the ore, fishing acquisition lobster, cut wood logs and the production of retail money they create. If these actions do not provide your preferred outcome, we can provide you with some valid and fascinating tactics to complete the rs gold.Rs gold |Rs 3 Gold |Buy Rs Gold

    ReplyDelete