Sunday, January 23, 2011

18 day RepRap Marathon


A experiment in self funded exponential replication.
For the next 18 days, it's just going to be me and my RepRap hobby.  It's something I have wanted to do since I first read about RepRap 2 years ago, and finally I have the time to do it (Use it or loose it vacation days, got to love them :) ).  This will be an experiment in how exponential growth works in the real world of RepRap. 

To keep myself honest, I am going do to 1 blog post each day telling about the progress i have made toward my goal, and what I have learned.  It should be interesting considering my pension for doing stupid things and telling the world about it. :)

I go into this project with

1 95% completed Prusa Mendel

1 50% complete set of Prusa RP parts set to SAE fasteners
1 100% at this time operating MB Cupcake (with DC gearmotor, so let's see if it holds out)
1 1 set of the Makergear Stepper extruder kit to replace my DC gearmotor if it dies
2 Set of screws, smooth , and threaded for Imperial Prusa Mendel
1 Set of screws, smooth, and threaded for Metric Prusa Mendel
2 sets of PEEK barriers from Makergear
2 NEMA 17 stepper motors (two different makes, so must me by X & Y)

My goal is to by the end of the 18 days have enough money coming in from RP parts sells, and enough experience with the Prusa Mendel Design that I can reach exponential growth (If only mathematically for a few days).

I am going to set a lofty goal, 6 new printers in 18 days, all funded via selling RP parts online.  I feel I can use what I have already because besides my Cupcake I got 14 months ago, everything else has been paid for by selling RP Parts.

The "Plan" assumes that I will not have the Prusa printing parts until Friday, that the Makerbot holds out for 18 days at a 20+ hour printing pace (We will see), that I will at no point have more than 2 printers functioning at one time, and that I have a quick turn over on the Prusa Mendel RP sets.

To this end all RP parts sold from this project will be only $100 ($50 less than the going rate), so that they go quickly.  All parts will come with a certificate stating how what number replication it is for me, and what machine made it.

My "base" build will be as follows
$50 4 http://www.alltronics.com/cgi-bin/item/28M056/55/Lin-Engineering-4118M-02-07RO-bipolar-stepper-motor 63 oz-inch stepper motors
$220 1 http://ultimachine.com/content/ramps-pre-assembled-kit Ramps Electronics and 4 connectors for motors
$165 http://www.makergear.com/products/plastruder 1 plastruder kit from Makergear, if they are out of stock I will just get 1 more stepper motor and $87 http://www.makergear.com/products/operators-pack an operators pack and mount
$40 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=110538227436&ssPageName=ADME:B:WNAFP:US:1123 a 20A power supply
$35 http://www.mcmaster.com/#9368T115 12 brass bushings, and http://www.mcmaster.com/#7959K24 8 foot of .2" xl 1/4 inch wide belting.
$50 Local fastener store all the Tool & threaded rod and fasteners.

So $560 that's the simplest, easiest way to build a Prusa, I could cut that by $200, and likely will if it seems practical, but considering I am going to be printing 20+ hours a day, I might not want to get into complicated soldiering :)

I go into this project with $600 from selling RP parts, so on Monday I will order 1 of everything I need for Prusa2

So for the 18 day run, this is my "plan"
1. Finish partial set, and 1 more for getting ahead on Prusa Mechanicals
All components for 2nd Prusa ordered
2. Sell 1 Prusa Set ($100)Altronics
3. Sell 1 Prusa Set ($100)Ebay Power supply
4. Sell 1 Prusa Set ($100)electronics
5. Sell 1 Prusa Set ($100)belts/bushings
6. Sell 1 Prusa Set ($100)Hot end
All components for 3rd Prusa ordered
7. Sell 1 Prusa Set ($100)Alltronics
8. Sell 1 Prusa Set ($100)Ebay
2nd Printer online
9. Sell 2 Prusa Set ($200)Electronics
10. Sell 2 Prusa Set ($200)belts/bushings/hotend
All componetns for 4th Prusa ordered
11. Sell 2 Prusa Set ($200)Electornics
12. Sell 2 Prusa Set ($200)Motors/Hot End
13. Sell 2 Prusa Set ($200)belts/bushings/powersupply
All components for 5th Prusa ordered
14. Sell 2 Prusa Set ($200)Electronics
15. Sell 2 Prusa Set ($200)Motors/Hot End
16. Sell 2 Prusa Set ($200)belts/bushings/powersupply
All components for 6h Prusa ordered
17. Sell 2 Prusa Set ($200)Electronics
18. Sell 2 Prusa Set ($200)motors/Hot end
All components for 7th Prusa but hot end belts and bushings ordered

That would mean that in 18 days I could supply the world with 27 new Prusa Mendels, and they would return the favor by giving me 6 1/2 back.  of course there are a lot of ways this could not work out.

-My MB loves to eat DC gearmotors, if this happens before I get Prusa1 up and going the Geared Stepper falls into the critical path.
-The parts could not sell, but I think at 1/3 less than the going rate I shouldn't have an issue with that.
-It could take more than a week to get Prusa1 up and going (All I need to do it put the build plate & hot end on, calibrate, and I am good).  Not likely, but with the help of #reprap in IRC I think I will have no issues
-The Great Gremlin, we don’t' talk about him, but Makergear and Prusa designs are mostly Gremlin resistant.

Next post tomorrow evening.  I made Day 1 pretty easy considering I work 14 hour days on the weekend, and those days are hard.  Wish me luck, and if you see me in #RepRap tell me to print faster. :)

Still Extruding

10 comments:

  1. Seems like you forgot to take plastic into account (not a critical part, I know)
    How much ABS do you think is needed for a prusa set?

    ReplyDelete
  2. I have over 14 lb of plastic :) Prusa only 2/3 lb, so I shouldn't run out without a lot of forwarning to pick up some more cheap plastic :)

    ReplyDelete
  3. I think this is a great idea! good luck! (and if you fancy listing on eMAKERshop, please do)

    ReplyDelete
  4. Hi Neil,
    Great plan - hope it goes well for you.
    One Question... Do you plan on printing or buying gear pulleys for the motors?
    I notice these need to be reasonably precise in construction and wondered what you are doing for these.
    Tks,
    No.6

    ReplyDelete
  5. Plan to try to print them. On my last Prusa I bought a set form Makergear, and they are NICE. He prints them currently on his Up!. I will try self printed on the next, and if I don't like will resort back to paying for them.

    Heck $10 for 2 nice gears is not bad at all

    ReplyDelete
  6. I still have the extra motors you sold me. I am happy to sell them back to you if you end up needing some.

    ReplyDelete
  7. Fantastic idea!!! But... updates please! :)

    ReplyDelete
  8. Good luck! Looking forward to updates :)

    ReplyDelete
  9. Great idea.

    But what happened after Day 1?

    Your videos of your build of your Prusa is one of the things that got me to decide on finally buying a kit to build a RepRap. I ordered a Prusa kit from MakerGear which I expect to receive in about a week and a half.

    -- Don King

    ReplyDelete
  10. Makerbot blew up and some family emergencies. :) But I did manage to finish 4 of them though :)

    ReplyDelete